- 您现在的位置：买卖IC网 > Sheet目录349 > PCA9624PW,118 (NXP Semiconductors)IC LED DRIVER RGBA 24-TSSOP
NXP Semiconductors
PCA9624
8-bit Fm+ I 2 C-bus 100 mA 40 V LED driver
7.3.1 Mode register 1, MODE1
Table 5. MODE1 - Mode register 1 (address 00h) bit description
Legend: * default value.
Bit
7
Symbol
AI2
Access
read only
Value
0
Description
Register Auto-Increment disabled.
1*
Register Auto-Increment enabled.
6
AI1
read only
0*
Auto-Increment bit 1 = 0.
1
Auto-Increment bit 1 = 1.
5
AI0
read only
0*
Auto-Increment bit 0 = 0.
1
Auto-Increment bit 0 = 1.
4
SLEEP
R/W
0
Normal mode [1] .
1*
Low power mode. Oscillator off [2] .
3
SUB1
R/W
0*
PCA9624 does not respond to I 2 C-bus subaddress 1.
1
PCA9624 responds to I 2 C-bus subaddress 1.
2
SUB2
R/W
0*
PCA9624 does not respond to I 2 C-bus subaddress 2.
1
PCA9624 responds to I 2 C-bus subaddress 2.
1
SUB3
R/W
0*
PCA9624 does not respond to I 2 C-bus subaddress 3.
1
PCA9624 responds to I 2 C-bus subaddress 3.
0
ALLCALL
R/W
0
PCA9624 does not respond to LED All Call I 2 C-bus
address.
1*
PCA9624 responds to LED All Call I 2 C-bus address.
[1]
[2]
It takes 500 ? s max. for the oscillator to be up and running once SLEEP bit has been set to logic 0. Timings
on LEDn outputs are not guaranteed if PWMx, GRPPWM or GRPFREQ registers are accessed within the
500 ? s window.
No blinking or dimming is possible when the oscillator is off.
7.3.2 Mode register 2, MODE2
Table 6. MODE2 - Mode register 2 (address 01h) bit description
Legend: * default value.
Bit
7
6
5
Symbol
-
-
DMBLNK
Access
read only
read only
R/W
Value
0*
0*
0*
Description
reserved
reserved
group control = dimming.
1
group control = blinking.
4
3
INVRT
OCH
R/W
R/W
0*
0*
reserved; write must always be a logic 0
outputs change on STOP command [1]
1
outputs change on ACK
2
1
0
-
-
-
R/W
R/W
R/W
1*
0*
1*
reserved; write must always be a logic 1 [2]
reserved; write must always be a logic 0 [2]
reserved; write must always be a logic 1 [2]
[1]
[2]
Change of the outputs at the STOP command allows synchronizing outputs of more than one PCA9624.
Applicable to registers from 02h (PWM0) to 08h (LEDOUT) only.
Remark: If you change these bits from their default values, the device will not perform as expected.
PCA9624
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 6 September 2012
? NXP B.V. 2012. All rights reserved.
9 of 37
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
PCA9625D/S911,518
IC LED DRIVER RGBA 32-SOIC
PCA9626BS,518
IC LED DRIVER RGBA 48HVQFN
PCA9632DP2,118
IC LED DRIVER RGBA 10-TSSOP
PCA9633BS,118
IC LED DRIVER RGBA 16-HVQFN
PCA9634D,118
IC LED DRIVER RGBA 20-SOIC
PCA9635PW/S911,118
IC LED DRIVER RGBA 28-TSSOP
PCA9685PW,118
IC LED DRIVER RGBA 28-TSSOP
PCA9922PW,118
IC LED DRIVER LINEAR 16-TSSOP
相关代理商/技术参数
PCA9624PW112
制造商:NXP Semiconductors 功能描述:IC LED DRVR TSSOP
PCA9625D
功能描述:LED照明驱动器 16BT I2C FMTP LED HVCON RST OE RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9625D,512
功能描述:LED照明驱动器 16BT I2C FMTP LED HVCON RST OE RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9625D,518
功能描述:LED照明驱动器 16-bit Fm I2C Bus 100mA 24 V LED drivr RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9625D/S911,518
功能描述:LED照明驱动器 16BT I2C FMTP LED HVCON RST OE RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9625D/S911-T
功能描述:LED照明驱动器 16BT I2C FMTP LED HVCON RST OE RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9625DS911,518
功能描述:LED照明驱动器 16-bit Fm I2C Bus 100mA 24 V LED drivr RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9625D-T
功能描述:LED照明驱动器 16BT I2C FMTP LED HVCON RST OE RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N